ATF Box & New Update

**haihau_pt** · Được sửa bởi haihau_pt ngày Wed Jun 02, 2010 8:21 am; sửa lần 1.

ATF [Advance Turbo Flasher]
Version 4.50 update!! 21 Mar 2010

What is new:

[[NewFirmware Update]]
LogiCore 3.21.20 (FPGA Flash Protocol Engine)

Fast DCT4 Engine
- Optimized for "Easy Cable" Flashing
- Upto 15 Mhz Flashing on new DCT4 Phones
- Fastest DCT4 flasher in the Market !!!
- Upto 4 times
faster compared to MOST 3rd Party Boxes
- Very Stable flashing and booting

Turbo BB5 Engine
- Timing Values are not Adjustable inside the
AdvanceBox.ini
- Now compatible with older FTDI drivers

Non Turbo BB5 Engine
- Improved Flashing Stability on phones with more
than 5 flash files

ATF (Advance Turbo Flasher)
official thread for UPDATES:
[You must be registered and logged in to see this link.]

Download from:
ATF (Advance Turbo Flasher) - [You must be registered and logged in to see this link.]
ATF (Advance Turbo Flasher) - Official
download area

ATF [Advance Turbo Flasher]
version 4.50 discussion thread:
[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support
forums:
World Wide: [You must be registered and logged in to see this link.]

**haihau_pt**

ATF [Advance Turbo Flasher] Version 4.60 update!! 22 Mar 2010

What is new:

Firmware Update Function was fixed to allow better compatibility with
"paranoid" anti-virus softwares that stops the previous updates. Added
"Restore" Firmware for boxes with Incomplete or Erased firmware due to
disrupted Firmware Updating.

Fast DCT4 Engine

- Faster Booting using Easy Cables
- Selected flashing speed will automatically adjust to slower speeds if
it detects a slow phone

Turbo BB5 Engine

- Fixed CNT 128 Conversion function for BB5 IMAGE files
- Internal DDR + 2TX buffer changed to 8MB
- Adjustable delay added in between Flash Erasing

ATF [Advance Turbo Flasher] official thread for UPDATES:
ATF [Advance turbo Flasher] Version 4.60 update!! 22 Mar 2010

ATF (Advance Turbo Flasher) version 4.60 discussion thread:
ATF [Advance Turbo Flasher] Version 4.60 update Discussion

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile

The Master Piece
[You must be registered and logged in to see this link.]

**Scorpion King**

ATF [Advance Turbo Flasher] Version 4.60
update!! 22 Mar 2010

What is new:

Firmware Update Function was fixed to allow better compatibility with
"paranoid" anti-virus softwares that stops the previous updates. Added
"Restore" Firmware for boxes with Incomplete or Erased firmware due to
disrupted Firmware Updating.

Fast DCT4 Engine

- Faster Booting using Easy Cables
- Selected flashing speed will automatically adjust to slower speeds if
it detects a slow phone

Turbo BB5 Engine

- Fixed CNT 128 Conversion function for BB5 IMAGE files
- Internal DDR + 2TX buffer changed to 8MB
- Adjustable delay added in between Flash Erasing

ATF [Advance Turbo Flasher]
official thread for UPDATES:
[You must be registered and logged in to see this link.]

Download from:
ATF (Advance Turbo Flasher) - [You must be registered and logged in to see this link.]
ATF (Advance Turbo Flasher) - Official
download area

Buy only from ATF (Advance Turbo Flasher) authorized
resellers:
ATF [Advance Turbo Flasher] Authorized Distributors
and Resellers List

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

**haihau_pt**

[SIZE="4"]ATF 5.30 UPDATE!! Flash Files Download Servers Added!! 2 JUN 2010[/SIZE]

[SIZE="3"]General Update[/SIZE]

Flash File Download Support Finally Launched !!!
FULL PACKAGE Flash File Installers
FULL Service Manuals for Levels 1,2,3 and 4 (most BB5 Phones)
FULL Schematics (most BB5 Phones)
SINGLE VARIANT Flash File Download (Similar to NAVIFIRM)

[You must be registered and logged in to see this image.]

End user can choose between downloading the FULL Pacakge Flash File or just downloading only specific variants.
Each Activated ATF Box is entitled to access the MOST complete and UP-TO-DATE
Flash Files for BB5 with 3.0 GB Bandwidth allocation per month.
New Server Lease for Activation Servers / NCK Unlock Servers / Custom SX-4 Servers
Software Window Size was adjusted to allow compatibility on PC's with low desktop video resolution.
Success Sound Customization is now Enabled. Make sure success sound wav file is atleast 5 seconds in duration.
DCT-4 Infineon Update

Added "Live Phone" booting option for XGOLD 101/102 and XGOLD 110 phones.

Live Phone Booting is used to improve compatibility with 1616-2 and 1800 phones that come from U.A.E.... These phones usually have "Made in India" in the back sticker as compared to "Made by Nokia" in most 1616-2 and 1800 phones.

Live Phone option can be found beside the "SCAN PHONE" button and it is NOT enabled by default.

New model 1616-2b RH-126 Support now.

ATF Driver Update

The 5.30 installer is now equipped with the latest FTDI 2.06.02 Drivers.

Never overwrite new FTDI drivers when you are trying to install other boxes like JAF, UFS etc... Old Boxes will work 100% with the latest FTDI drivers. But if you put old FTDI Drivers, then ATF Box will not function anymore.

Always check your driver version... Usually JAF and UFS drivers are from 2006... Now is 2010 already, so please STOP LIVING in the past . Use 2010 drivers because you are now living in year 2010.

ATF [Advance Turbo Flasher] official thread for UPDATES:
[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] version 5.30 Update - Public discussion thread:

[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile

**Scorpion King**

ATF 5.50 New Loaders + New Box Firmware Update!! 07 JUL 10!!

First Third Party Box to add Support for the Latest Nokia Flash Loader Pacakge 10.20.001.6 (May 18, 2010)

N86 RM-484 42 SEC
[You must be registered and logged in to see this link.]
5230 RM-588 38 SEC
[You must be registered and logged in to see this link.]

New FPGA Firmware]
LogiCore 7.07.10

[BB5 Nitro Engine]
Now using the Lastest Flash Loader Pacakge 10.20.001.6

[BB5 Turbo Engine]
Now using a more stable RAP3gV2 and V3 Loaders

[DCT4 Engine]
Booting Problem Fixed for DCT4+ Phones

[General Fixes and Tweaks]
Quick Access "Backup RPL" Button is now on the Main Software Page

Who will buy this if you can get more in ATF?

__________________________________________________ ________________________

ATF 5.50 New Loaders + New Box Firmware Update!! - Official Update Thread:

[You must be registered and logged in to see this link.]

ATF 5.50 New Loaders + New Box Firmware Update!! - Public discussion thread:

ATF 5.50 New Loaders + New Box Firmware Update!! - Public Discussion Thread:

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM

The Master Piece

**Scorpion King**

ATF 5.55 - New FBUS Loaders - Optional Update !! 15 JUL 2010

First Third Party Box to add Support for the Latest
Nokia Flash Loader Package 10.22.000.2 (May 31, 2010)

Note:

This Update is Optional and it is only for End Users
who always want to use the Latest Flash Loaders available
The software version is 5.55, and after you update we
strongly suggest that you perform a "Restore Box" so we
can guarantee that you are using the latest version of
the compiled LogiCore 7.07.10 Firmware.

Bug Fixes Inside:
1. BB5 Read ASK is now enabled
2. Pooling Phone timmeout is now 3 times longer
3. Server access is now using IP addresses instead of domain names
4. Simlock Server Version reading is now Skipped

Who will buy this if you can get more in ATF?

ATF 5.55 - New FBUS Loaders - Optional Update 15 JUL 2010

[You must be registered and logged in to see this link.]

ATF 5.55 - New FBUS Loaders - Optional Update!! - Public discussion thread:
ATF 5.55 - New FBUS Loaders - Optional Update !! - Public discussion thread:

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM

**Scorpion King**

ATF 5.60 Multi-USB Update!! Public Discussion Thread

ATF 5.60 Muti-USB Update[ Again First In World With Unique Advance Features
ATF Multi-USB Mode Flashing

Flash TWO BB5 Phones at the same time
The Phones can be different models or the same model
The Phones can be "DEAD" or "ALIVE"
This option saves you a lot of time and it is very EASY and SAFE to use

ATF USB Flashing uses the latest Flash Loaders and Flash Protocols
There is no need to select OBSOLETE "Old Protocols"/ "Old Loaders"
All New Phones are Supported

[You must be registered and logged in to see this link.]

ATF USB RPL Backup

Creates RPL Backups for Supported Phones via USB
Supported Phones are ALL BB5 RAPUYAMA, RAP3Gv4 and BroadCom based Phones
No other 3rd Party Software in the world can do this

[You must be registered and logged in to see this link.]

Unique USB Flash Procedure

ATF is rewriting the way USB Flashing is Done
ATF does not follow the Standard USB Flashing done by other Softwares
ATF uses a different approach to make USB Flashing SAFER and EASIER
Bulk ERASE and Bulk WRITE MODES are not used and this increases the
compatibility on the latest phones with 5 or more Flash Files especially
phones with ENO Packages.

General Updates:

Infineon Phone C1-00 RM-689 Now Fully Supported
BroadCom "USB Only" Phones Now Fully Supported
Update Important Files Button added for Minor Updates
Skin Resolution Increased
DCT4 Booting and FBUS Scanning was Improved

[You must be registered and logged in to see this link.]

Who will buy this if you can get more in ATF?
[You must be registered and logged in to see this link.]

ATF 5.60 Multi-USB Update!! 19 Aug 2010

[You must be registered and logged in to see this link.]

Buy only from ATF [Advance Turbo Flasher] authorized resellers:

[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

**Scorpion King**

BETA 5.65 version. ATF

anh em ai gặp lỗi flash usb load thêm :BETA 5.65 version. ATF

It is only 3 MB file, and you just put it inside the

C:\AdvanceBox Turbo Flasher\

[You must be registered and logged in to see this link.]

**haihau_pt**

ATF 5.70 Multi-ATF Box Update!! 25 Aug 2010!!

Multi-ATF Box Flashing

Now you can use more than 1 ATF Box on 1 PC
The Number of Boxes is limited only with PC's Resources/Performance
So it is possible to connect 10, 20, 100 etc... Boxes if your PC can handle it
** We Strongly Suggest you should use a USB HUB with an External
** Power Adapter with about 2A or more Power to give.
** Check out [You must be registered and logged in to see this link.] for the 10 Port USB we have tested

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

Bugfixes:

[CNT Flashing S40 Fixed]
Missing Calculator, Themes and Other CNT Apps for S40 phones
are now fixed. We have tested 6300 and 3110c Phones.
In USB Flashing Mode, you can Force 128K CNT for DEAD USB Mode.
Only use this option if something is missing inside the Phone
after flashing. Otherwise, leave this option unchecked.

[User.ini Handling Fixed]
Files that cannot be found inside the default paths are now
accessible when saved inside the User.ini.
User selected files are saved inside User.ini and WILL NOT BE
overwritten with new installations above 5.60.

[GUI USB Disabled Fixed]
After selecting DCT4 and going back to BB5, the USB option is
again enabled.

Who will buy this if you can get more in ATF?

[You must be registered and logged in to see this link.]

__________________________________________________ ________________________

ATF 5.70 Multi-ATF Box Update!! Offical Update Thread:
[You must be registered and logged in to see this link.]

ATF 5.70 Multi-ATF Box Update!! - Public discussion thread:

[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: [You must be registered and logged in to see this link.]
Indonesia: [You must be registered and logged in to see this link.])
Philippine: [You must be registered and logged in to see this link.]
Syria: [You must be registered and logged in to see this link.]
Chinese support forum : [You must be registered and logged in to see this link.]
Vietnam: [You must be registered and logged in to see this link.]
India: [You must be registered and logged in to see this link.]
Official Iran Support Forum : [You must be registered and logged in to see this link.]

The Master Piece

[You must be registered and logged in to see this link.]

**haihau_pt**

Multi-ATF Box Flashing

Now you can use more than 1 ATF Box on 1 PC
The Number of Boxes is limited only with PC's Resources/Performance
So it is possible to connect 10, 20, 100 etc... Boxes if your PC can handle it
** We Strongly Suggest you should use a USB HUB with an External
** Power Adapter with about 2A or more Power to give.
** Check out [You must be registered and logged in to see this link.] for the 10 Port USB we have tested

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

Bugfixes:

[CNT Flashing S40 Fixed]
Missing Calculator, Themes and Other CNT Apps for S40 phones
are now fixed. We have tested 6300 and 3110c Phones.
In USB Flashing Mode, you can Force 128K CNT for DEAD USB Mode.
Only use this option if something is missing inside the Phone
after flashing. Otherwise, leave this option unchecked.

[User.ini Handling Fixed]
Files that cannot be found inside the default paths are now
accessible when saved inside the User.ini.
User selected files are saved inside User.ini and WILL NOT BE
overwritten with new installations above 5.60.

[GUI USB Disabled Fixed]
After selecting DCT4 and going back to BB5, the USB option is
again enabled.

Who will buy this if you can get more in ATF?

[You must be registered and logged in to see this image.]

__________________________________________________ ________________________

Download From:
ATF [Advance Turbo Flasher] -[You must be registered and logged in to see this link.]
ATF [Advance Turbo Flasher] - [You must be registered and logged in to see this link.]
ATF [Advance Turbo Flasher] - [You must be registered and logged in to see this link.]

ATF 5.70 Multi-ATF Box Update!! - Public discussion thread:

[You must be registered and logged in to see this link.]

Buy only from ATF [Advance Turbo Flasher] authorized resellers:
[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: [You must be registered and logged in to see this link.]
Indonesia: [You must be registered and logged in to see this link.])
Philippine: [You must be registered and logged in to see this link.]
Syria: [You must be registered and logged in to see this link.]
Chinese support forum : [You must be registered and logged in to see this link.]
Vietnam: [You must be registered and logged in to see this link.]
India: [You must be registered and logged in to see this link.]
Official Iran Support Forum : [You must be registered and logged in to see this link.]

The Master Piece
Attached Files [You must be registered and logged in to see this image.] [You must be registered and logged in to see this link.] (36.33 MB, 232 views) [You must be registered and logged in to see this image.] [You must be registered and logged in to see this link.] (3.09 MB, 87 views)

**haihau_pt**

AdvanceBox Turbo Flasher v5.90

Change Logs:

New BB5 Loader Package Version 10.34.1.3
DCT4 RPL DATA1 is Backuped Automatically in First Instance of "Scan Phone"
Security Code read attempt during "Scan Phone"
Read Phone Mode on "Scan Phone"
Read Dynamic Camera Configuration on "Scan Phone"
Full Logs option for Booting BB5
Fixed DCT4 Local Mode on Live DCT4 Phones when First Connected to Box
Fixed DCT4 Long Boot
Autodetect and Autoswitch Between BB5 and DCT4 Products according to

Phone Connected

Software will always select the Highest Firmware available on your PC
Manual and Auto Detect of VCCIO Levels
Support for DCT4 "ini" Files which are older than DP Version 2.0
Quick Fix for SL1/SL2 Downgrade Fix
Fixed Default Directories for Manually Adding Flash Files
File System Format for BB5 Phones
Corrected SL3 Type Simlock Reading on Buscheck
Shows Deep Scan Info for BB5 Phones
Local Storage for Unique ID's Read from Supported Phones
Manual Erase Flash for BB5 Phones (NOR or NAND + CMT or APE)
Infineon New Loader Support
Fixed FBUS UART Reading/Writing with Better Timing
Improved Speed for BB5 USB Flashing on RAPUYAMA, RAP3Gv4 and BroadCom Phones
New Phone Connectivity Drivers Included
Dynamic Camera Configuration Reading and Writing Fixed for non standard DCC Files

Who will buy this if you can get more in ATF?

[You must be registered and logged in to see this image.]

__________________________________________________ ________________________

Buy only from ATF [Advance Turbo Flasher] authorized resellers:
[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: [You must be registered and logged in to see this link.]
Indonesia: [You must be registered and logged in to see this link.])
Philippine: [You must be registered and logged in to see this link.]
Syria: [You must be registered and logged in to see this link.]
Chinese support forum : [You must be registered and logged in to see this link.]
Vietnam: [You must be registered and logged in to see this link.]
India: [You must be registered and logged in to see this link.]
Official Iran Support Forum : [You must be registered and logged in to see this link.]

The Master Piece

[You must be registered and logged in to see this image.]

**haihau_pt**

AdvanceBox Turbo Flasher v6.00

Change Logs:

New LogiCore 8.15.10 Box Firmware (Must Update firmware in order to use v6.00)
New BB5 Loader Package Version 10.42.000.7
Added DCT4/DCT4+/DCT4++ RPL Server (FREE, NO NEED ACTIVATION)
Added DCT4 Manual Erase Option
Added Auto Selection of Flash Chip Size for Manual Erase
Fixed BB5 APE NAND Erasing Bug with New Loaders
New Nokia Connectivity Driver for USB
Added Skip Read Papub option for USB Flashing (usefull for dead phone flashing)
Added New Products to Nokia.ini
Who will buy this if you can get more in ATF?

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this image.]

__________________________________________________ ________________________

ATF 6.00 Update!! Offical Update Thread:
[You must be registered and logged in to see this link.]

ATF 6.00 Update!! - Public discussion thread:

ATF 6.00 Update!! 11 NOV 10!! Public Discussion Thread:

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: Advance Turbo Flasher - GSM-Forum
Indonesia: ATF (Advance Turbo Flasher))
Philippine: Gsmph
Syria: Arabic Support (Syria) GsmVIP
Chinese support forum : ATF Box
Vietnam: Saigonmobile
India: Advance Box - .:: GsmIndia ::.
Official Iran Support Forum : ASANGSM FORUM
Bangladesh: Advance Box - Dhaka Mobile

The Master Piece

[You must be registered and logged in to see this image.]

**haihau_pt**

ATF 6.10 Update!! 8 SEC Flashing!! 07 DEC 10!!

Common Changes:

Application GUI is now locked to 800x600 resolution (slightly bigger than before)
Added New Products to Nokia.ini
Update File Path was changed (will be enabled in Server side)
DCT4 Change Logs:
New DCT4 Booting v2 with better compatibility with Desktop PCs and ICH7
DCT4 Write RPL Speed was adjusted for better compatibility with very Slow UPPs
Fixed Server Bug on DCT4 RPL Credits Counter

BB5 USB Change Logs:

Original SX4 Card Authorization via Server is now Enabled in USB Mode
Life Timer Tuning is now enabled in USB Mode (Supports Broadcom and Rapuyama Fields as well)
Customized PM Programming is now Enabled in USB Mode
Extended Self-Tests and Test-Scan is now Enabled in USB Mode
PM Full Writing on non write protected fields are now enabled in USB Mode
Read Memory Card Password is now added for USB Mode
Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for USB Mode
Manual Send Unlock Codes is now enabled in USB Mode
Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during USB Flashing
Write New Product Code is now enabled in USB Mode
Super Dongle Validity Check is now enabled in USB Mode

BB5 FBUS Change Logs:

Life Timer Tuning is now Supports Broadcom and Rapuyama Fields
Read Memory Card Password is now added for FBUS Mode
Reset SL2 and SL3 FBUS or Keypress Lock Counters is now added for FBUS Mode
Automatic Life Timer Reset to 0000:00 when Factory Reset is selected during FBUS Flashing

Just some more notes...

If MMC Password is available, it will be saved during Simlock Backup as well.
FBUS Loaders are still the same as the 6.00 release which is 10.42.000.7
USB flashing for Broadcom Phones just takes 8~9 seconds (tested on X2-00, C3-00, 2710c and 7020)
Life Timer Tuning AUTODETECTS the correct Fields for every BB5 Phone Released upto Today (First in the World)
Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Virus Scanner EXCLUSION LIST
Always add --> C:\AdvanceBox Turbo Flasher\AdvanceBox.exe to your Windows Firewall Trusted Applications List
This Software Release still uses LogiCore 8.15.10, so there is NO NEED to Update the Firmware if you already have this firmware version.

2710c USB Flash with LifeTimer Reset 8 Sec!!

Code:: Entry Point: 0x01E2
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm586__06.13.ppm_s
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 115
Entry Point: 0x00FA
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm586__06.13.image_s_ma_black
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 241
Entry Point: 0x0134
Page Format : -1
MAX PAGE : 0x0000E000
[]: Found 1 active devices.
[Nokia 2710 Navigation Edition USB Phonet]: Opening Connection
[Nokia 2710 Navigation Edition USB Phonet]: Port opened OK!
SW: V 06.13 09-04-10 RM-586 (c) Nokia
IMEI: 358294031250993
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
START FULL PM BACKUP
Please Wait...
Reading : PM 0~400... OK!
FULL PM Backup Saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\358294031250993\USB_FULL_BACKUP_V 06.13 09-04-10 RM-586 (c) Nokia_358294031250993_Not Locked_124901.pm
Reading battery value : 4119 mV

AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 6 (0x06)
1 SYSTEM_ASIC_ID 01
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000000
ID DWORD 1 : 00000000
ID DWORD 2 : 22000509
ID DWORD 3 : 200C0000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00005361
3 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : AB079603
ID DWORD 1 : 03FB3C85
ID DWORD 2 : AB035491
ID DWORD 3 : 40ACB2E7
ID DWORD 4 : 873C89B5
4 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
5 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 1B 0D 74 C5 32 CA 1C 61 33 94 0C 74 0E 8C 78 6E
6 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : DE56D582
CRC 1 : BDDE7A3A
START FLASHING
RawLoaderExtract: Processing rm586__06.13.mcusw
Match LOADER : C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_usb2nd.fg
Loader Uploaded.....
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : C1
SubBlocks : 06
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : RAM 05
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 01
Manufacturer Code : 0000 -> SPANSION
Device ID : 0001 -> not used
Extended/Fixed ID : 0000
Revision ID : 0000
5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MuxOneNAND 03
Device Index : 00
Manufacturer Code : 00EC ->
Device ID : 0030 -> K5W1G13ACB
Extended/Fixed ID : 0000
Revision ID : 0321
6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
Block Length : 09
BB ASIC Index : CMT 00
Data :
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Flash Descriptor
Manufacturer Code : 00EC
Device ID : 0030
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 08000000 (128 MB)
VPP Info : 0000
Erase10s : 1E
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
ROOTHASH : 1B0D74C532CA1C6133940C740E8C786E
Match File.....C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_XSR16_usbalg.fg
Done!
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok
START READING RPL DATA
IMEI: 358294031250993
Reading : NPC... OK!
Reading : CCC... OK!
Reading : HWC... OK!
Reading : R&D... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\358294031250993\358294031250993_124912.rpl
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
PAPUB Keys Hash : 84CDC75F79F52BBAE46EA3A70C9240861412C480
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.mcusw
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
Certificate 1
Name : NPC
ASIC Index : CMT 0
Certificate 2
Name : CCC
ASIC Index : CMT 0
Certificate 3
Name : HWC
ASIC Index : CMT 0
Certificate 4
Name : RND
ASIC Index : CMT 0
Certificate 5
Name : R&D
ASIC Index : CMT 0
STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 4E 44 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 B6
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5...
Partition Info
Partition Blocks : 1
1 PARTITION_INFO_BB5
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Partition Version : 00010000
Spare : FFFFFFFF
Num Partitions : 00000004
Partition 1
ID : 00000003 COPIEDOS
Attribute : 00000002 RO
Start Address : 00020000
Size : 02660000
Partition 2
ID : 00000008 FILESYSTEM
Attribute : 00000001 RW
Start Address : 02800000
Size : 04D40000
Partition 3
ID : 0000000A PMM
Attribute : 00000001 RW
Start Address : 07540000
Size : 00600000
Partition 4
ID : 0000000B
Attribute : 00000001 RW
Start Address : 07B40000
Size : 00180000
PARTITION_INFO_REQUEST_BB5 : 64012F4F00030000010000FFFFFFFF000000040000000300000002000200000266000000000008000000010280000004D400000000000A0000000107540000006000000000000B0000000107B400000018000005
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength : 0x80 (128)
ERASE Blocks : 0x03 (3)
0 ERASE_AREA_BB5 0x12
Block Length : 0x1B (27)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 00000000-0001FFFF
1 : 00020000-000203FF
2 : 00060000-01FFFFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000A0000000100000002000000640000000200000002000000010000000000000000
2 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000B0000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5003120B000300000000000001FFFF120B00030000020000000203FF120B0003000006000001FFFFFF93
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000A00000001000000020000006400000002000000020000000100000000000000003B
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000B00000000000000020000006400000002000000020000000100000000000000003B
Successfully erased..
Total blocks to write : 463
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : UPDAPP
>> CMT Rootkey Hash CERT : MCUSW
>> CMT Rootkey Hash CERT : GENIO_INIT
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.ppm_s
StartErase_DCT5...
BlockLength : 0x0E (14)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 02000000-0267FFFF
ERASE_REQUEST_BB5 : 5001120B000300020000000267FFFF75
Successfully erased..
Total blocks to write : 115
ImagePath: C:\Nokia Firmware\RM-586\
ImadeFilename: rm586__06.13.image_s_ma_black
StartErase_DCT5...
BlockLength : 0x3F (63)
ERASE Blocks : 0x02 (2)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 02800000-0753FFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 00000000000000080000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5001120B000300028000000753FFFF04
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000800000000000000020000006400000002000000020000000100000000000000003E
Successfully erased..
Total blocks to write : 241
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 15 STATUS_NAND_OK_BB5
Block Length : 0F
BB ASIC Index : 00
Device Type : 03
Device Type : 00
Num Bad Blocks : 00000001
Additional Bad : 00000001
Correctable ECC : 00000000
FlashInfo.RestartMode : 2
Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:08
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 100 seconds)
If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
Elapsed Time: 15 Seconds...
SW: V 06.13 09-04-10 RM-586 (c) Nokia
IMEI: 358294031250993
CONFIG KEY: 8000000000000002
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SUPER_DONGLE_TEST : PASSED
SECURITY_CODE : 12345
================================================
SL3 Phone detected
================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...

FACTORY SET TO : Factory Set Full
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Production Tune
OK
FACTORY SET TO : Production Tuning
OK
FACTORY SET TO : Reset User Code
OK
FACTORY SET TO : Service Centre
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : User Data
OK
RESET LIFE TIMER TO : 0000:00
OK

X2-00 USB Flash with LifeTimer Reset 8 Sec!!

Code:: Number of Image Files: 3
Processing Image File :
rm618__04.80.mcusw
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 506
Entry Point: 0x01E5
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm618__04.80.ppm_a
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 109
Entry Point: 0x0100
Page Format : -1
MAX PAGE : 0x0000E000
Processing Image File :
rm618__04.80.image_a_0595127_004
CMT Type : BB5
CMT Algorithm : XSR 1.6
Secondary Sending Speed : 650000Hz
Algorithm Sending Speed : 6500000Hz
Program Sending Speed : 6500000Hz
Message Reading Speed : 98000Hz
Number of Blocks : 317
Entry Point: 0x0134
Page Format : -1
MAX PAGE : 0x0000E000
[]: Found 1 active devices.
[Nokia X2-00 USB Phonet]: Opening Connection
[Nokia X2-00 USB Phonet]: Port opened OK!
SW: V 04.80 03-08-10 RM-618 (c) Nokia
IMEI: 353423040652148
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
START FULL PM BACKUP
Please Wait...
Reading : PM 0~400... OK!
FULL PM Backup Saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\353423040652148\USB_FULL_BACKUP_V 04.80 03-08-10 RM-618 (c) Nokia_353423040652148_Not Locked_125647.pm
Reading battery value : 4097 mV

AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
BootRom Verified!
BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 6 (0x06)
1 SYSTEM_ASIC_ID 01
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000000
ID DWORD 1 : 00000000
ID DWORD 2 : 22000509
ID DWORD 3 : 200C0000
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00005361
3 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : B1096A83
ID DWORD 1 : 135F4216
ID DWORD 2 : 1575A668
ID DWORD 3 : 5044D453
ID DWORD 4 : E87FCD90
4 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
5 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 1B 0D 74 C5 32 CA 1C 61 33 94 0C 74 0E 8C 78 6E
6 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : DE56D582
CRC 1 : BDDE7A3A
START FLASHING
RawLoaderExtract: Processing rm618__04.80.mcusw
Match LOADER : C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_usb2nd.fg
Loader Uploaded.....
MCU_CONFIGURATION_RESPONSE_BB5:
MessageID : C1
SubBlocks : 06
1 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : RAM 05
Device Index : 00
Manufacturer Code : 0000 -> Flash
Device ID : 0000 -> not detected
Extended/Fixed ID : 0000
Revision ID : 0000
2 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MMC 04
Device Index : 00
Manufacturer Code : FFFF -> Flash
Device ID : 0000 -> BAD FLASH TYPE
Extended/Fixed ID : 0000
Revision ID : 0000
3 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 00
Manufacturer Code : 0020 ->
Device ID : 0030 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0131
4 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : NOR 00
Device Index : 01
Manufacturer Code : 0000 -> SPANSION
Device ID : 0001 -> not used
Extended/Fixed ID : 0000
Revision ID : 0000
5 Sub Block ID : 10 STORAGE_DEVICE_ID_BB5
Block Length : 0B
BB ASIC Index : CMT 00
Device Type : MuxOneNAND 03
Device Index : 00
Manufacturer Code : 0020 ->
Device ID : 0030 -> Type not in database
Extended/Fixed ID : 0000
Revision ID : 0131
6 Sub Block ID : 35 NAND_DRIVER_VERSION_BB5
Block Length : 09
BB ASIC Index : CMT 00
Data :
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Flash Descriptor
Manufacturer Code : 0020
Device ID : 0030
Extended/Fixed ID : 0000
Revision ID : 0000
Size : 08000000 (128 MB)
VPP Info : 0000
Erase10s : 1E
Block1s : 32
BErase1s : 02
Reserved0 : 00
Reserved1 : 00
Reserved2 : 00
ROOTHASH : 1B0D74C532CA1C6133940C740E8C786E
Match File.....C:\AdvanceBox Application_NEW\Nokia\BB5_Loader\BB5_USBLoaders\BCM21351_XSR16_usbalg.fg
Done!
FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)
FUR control Ok
START READING RPL DATA
IMEI: 353423040652148
Reading : NPC... OK!
Reading : CCC... OK!
Reading : HWC... OK!
Reading : R&D... OK!
RPL Backup was Successful...
Plain RPL saved to:
C:\AdvanceBox Application_NEW\Nokia\Backup\353423040652148\353423040652148_125658.rpl
Pabub KEY Request
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
PAPUB_KEYS_HASH_RESP_BB5 2A
BB Asic Index : 00
PAPUB Keys Hash : E9700989029D9E899915F781B1582048E042A738
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.mcusw
Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT 00 only)
Certificate 1
Name : NPC
ASIC Index : CMT 0
Certificate 2
Name : CCC
ASIC Index : CMT 0
Certificate 3
Name : HWC
ASIC Index : CMT 0
Certificate 4
Name : R&D
ASIC Index : CMT 0
STORE_CERTIFICATE_REQUEST_BB5 : 61 04 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 D3
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5...
Partition Info
Partition Blocks : 1
1 PARTITION_INFO_BB5
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Partition Version : 00010000
Spare : FFFFFFFF
Num Partitions : 00000004
Partition 1
ID : 00000003 COPIEDOS
Attribute : 00000002 RO
Start Address : 00020000
Size : 024E0000
Partition 2
ID : 00000008 FILESYSTEM
Attribute : 00000001 RW
Start Address : 02900000
Size : 04C40000
Partition 3
ID : 0000000A PMM
Attribute : 00000001 RW
Start Address : 07540000
Size : 00600000
Partition 4
ID : 0000000B
Attribute : 00000001 RW
Start Address : 07B40000
Size : 00180000
PARTITION_INFO_REQUEST_BB5 : 64012F4F00030000010000FFFFFFFF00000004000000030000000200020000024E000000000008000000010290000004C400000000000A0000000107540000006000000000000B0000000107B40000001800001D
PARTITION_INFO_REQUEST_BB5 : No Error - 0 (0x00)
ProcessPartitionInfo_DCT5 : No Error - 0 (0x00)
StartErase_DCT5...
BlockLength : 0x90 (144)
ERASE Blocks : 0x03 (3)
0 ERASE_AREA_BB5 0x12
Block Length : 0x2B (43)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 00000000-0001FFFF
1 : 00020000-000203FF
2 : 00060000-011BFFFF
3 : 011C0000-01CFFFFF
4 : 02500000-028FFFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000A0000000100000002000000640000000200000002000000010000000000000000
2 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 000000000000000B0000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5005120B000300000000000001FFFF120B00030000020000000203FF120B00030000060000011BFFFF120B000300011C000001CFFFFF120B00030002500000028FFFFF69
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000A00000001000000020000006400000002000000020000000100000000000000003B
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000B00000000000000020000006400000002000000020000000100000000000000003B
Successfully erased..
Total blocks to write : 506
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : ADA
>> CMT Rootkey Hash CERT : RAP3NAND
>> CMT Rootkey Hash CERT : ISA+DYNSW
>> CMT Rootkey Hash CERT : MCUSW
>> CMT Rootkey Hash CERT : MCUSW1
>> CMT Rootkey Hash CERT : GENIO_INIT
>> CMT Rootkey Hash CERT : UPDAPP
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.ppm_a
StartErase_DCT5...
BlockLength : 0x0E (14)
ERASE Blocks : 0x01 (1)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 01D00000-024FFFFF
ERASE_REQUEST_BB5 : 5001120B00030001D00000024FFFFFBE
Successfully erased..
Total blocks to write : 109
ImagePath: C:\Nokia Firmware\RM-618\
ImadeFilename: rm618__04.80.image_a_0595127_004
StartErase_DCT5...
BlockLength : 0x3F (63)
ERASE Blocks : 0x02 (2)
0 ERASE_AREA_BB5 0x12
Block Length : 0x0B (11)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
0 : 02900000-0753FFFF
1 FORMAT_PARTITION_BB5 0x19
Block Length : 0x2F (47)
BB ASIC Index : 0x00 CMT
Device Type : 0x03 MuxOneNAND
Device Index : 0x00
Format Info ID : 0x02000000
Format Info : 00000000000000080000000000000002000000640000000200000002000000010000000000000000
ERASE_REQUEST_BB5 : 5001120B000300029000000753FFFFF4
ERASE_REQUEST_BB5 : 5001192F00030000000002000000000000000800000000000000020000006400000002000000020000000100000000000000003E
Successfully erased..
Total blocks to write : 317
ContinueFlash_DCT5 Complete
Continue Flash Complete : : No Error - 0 (0x00)
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 15 STATUS_NAND_OK_BB5
Block Length : 0F
BB ASIC Index : 00
Device Type : 03
Device Type : 00
Num Bad Blocks : 00000001
Additional Bad : 00000001
Correctable ECC : 00000000
FlashInfo.RestartMode : 2
Flashing Done...
Total Flashing Time (Erase + Flashing) : 00:00:08
(Booting time is NOT Included)
Waiting for Phone to Start-Up..(Max 100 seconds)
If Windows is Installing Drivers...
Phone Polling MIGHT Exit Automatically.
Elapsed Time: 5 Seconds...
Elapsed Time: 10 Seconds...
SW: V 04.80 03-08-10 RM-618 (c) Nokia
IMEI: 353423040652148
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : 0/3 , 0/10
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SP Lock Status : Not Locked
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SUPER_DONGLE_TEST : PASSED
SECURITY_CODE : 12345
================================================
SL3 Phone detected
================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...

FACTORY SET TO : Factory Set Full
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Production Tune
OK
FACTORY SET TO : Production Tuning
OK
FACTORY SET TO : Reset User Code
OK
FACTORY SET TO : Service Centre
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : User Data
OK
RESET LIFE TIMER TO : 0000:00
OK

How Fast is 8 SEC??

Who will buy this if you can get more in ATF?

[You must be registered and logged in to see this link.]

__________________________________________________ ________________________

ATF 6.10Update!! - Public discussion thread:

[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: [You must be registered and logged in to see this link.]
Indonesia: [You must be registered and logged in to see this link.])
Philippine: [You must be registered and logged in to see this link.]
Syria: [You must be registered and logged in to see this link.]
Chinese support forum : [You must be registered and logged in to see this link.]

The Master Piece

[You must be registered and logged in to see this link.]

**Scorpion King**

[b]ATF 6.30 Christmas Update!! 24 DEC 10!! Merry Christmas!!

Common Changes: [/b]

[b]Added New Products to Nokia.ini[/b]
[b]DCT4 Change Logs:[/b]

[b]New DCT4 Booting Procedure now compatible with any USB Hardware Chips (ICH7 etc)[/b]
[b]Adjusted Secondary Loader Sending Speed during Buschecking and UEM Writing[/b]
[b]Write RPL Timeout Delay was increased[/b]
[b]Common Software Change Logs:[/b]

[b]"Regular PCB" and "Modified PCB" can now be selected before clicking "Restore Box"[/b]
[b]This is useful for end users who has accidentally writen the wrong firmware to their box [/b]
[b]Flash File Server Change Logs:[/b]

[b]New Authentication Scheme for easier user access[/b]
[b]Download Activity Logging (IP Address, Box ID)[/b]

[b]Who will buy this if you can get more in ATF?

[You must be registered and logged in to see this link.]

__________________________________________________ ________________________

ATF 6.30 Download Thread:
[You must be registered and logged in to see this link.]

[b]ATF 6.30 Update!! - Public discussion thread:

[You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official web sites:
International - [You must be registered and logged in to see this link.]

ATF [Advance Turbo Flasher] official support forums:
World Wide: [You must be registered and logged in to see this link.]
Indonesia: [You must be registered and logged in to see this link.])
Philippine: [You must be registered and logged in to see this link.]
Syria: [You must be registered and logged in to see this link.]
Chinese support forum : [You must be registered and logged in to see this link.]
Vietnam: [You must be registered and logged in to see this link.]
India: [You must be registered and logged in to see this link.]
Official Iran Support Forum : [You must be registered and logged in to see this link.]
Bangladesh: [You must be registered and logged in to see this link.]

The Master Piece

[You must be registered and logged in to see this link.] [/b][/b]

**Sponsored content**

Liệt kê những bài viết mới nhất

ATF Box & New Update

ATF Box & New Update