Here are first steps with RIFF JTAG Box:

Download: RIFF_USB_DRIVER.

Download:http://www.4shared.com/file/2sdMOYbL/_4__RiffSetup_2_.html

• Connect RIFF Box and install provided USB Driver
  

Now
You are ready to download complete repair packs ,new
firmware and
latest JTAG Manager software:

• Run
  the JTAG Manager setup file and install it
  
• Click
  JTAG Manager icon in Quick Launch menu, or run it from
  Start->
  Program Files menu
  
• Switch to "Box
  Service" TAB and click "Check for Updates" button
  
• Allow
  JTAG MAnager to access internet if You have firewall
  
• JTAG
  Manager will connect to update server and inform You about
  
  available updates.
  
• Click "Download
  Selected" and wait for process to be finished.
  Take note, there is
  around 250 MB of files at the moment, so in case
  You want only
  new firmware and JTAG Manager, and some of the repair
  DLL-s, You
  can uncheck rest of the files and download only selected.
  
• After
  download is finished, You will be notified, and JTAG
  Manager will
  restart, informing You about new firmware.
  
• Finish
  the firmware upgrade process and after RIFF Box restart
  You are
  ready to work.
  

Working with dead phones:

• Start the JTAG Manager and
  switch to "Resurrection" TAB
  
• Select Your
  model and its part - PDA or Modem if You have
  Samsung
  
• Click
  "Interface pinout" button and connect the PCB to RIFF Box
  20 pin
  connector
  
• Click
  "Resurrection Help" and CAREFULLY read
  the manual!
  
• Click
  on "Resurrection" button and wait for process to be
  finished
  
• Assemble
  PCB and reflash it with normal firmware
  
• Thats
  it
  

If You have any problem which is not
described in Resurrection
Manual, please ask on forum. Always try
to include operation log and
as much as possible informations.

.

RIFF JTAG – HTC Dream Google G1 Unbrick, Unlock, IMEI repair


03.08.2010 HTC Dream Google G1 Unbrick, Unlock, IMEI repair.

Please start JTAG Manager and click “Check for Updates” button. You’ll
be notified about new DLL-s, download it and restart the software.
“HTC_Dream.dll” contains pinout, repair instructions and required repair
files for HTC Dream Google G1 Unbrick, Unlock and IMEI repair.

Today's updates :

JTAG Manager 1.12
------------------
- Added mutlichain options support for CMM scripts
- Added advanced multichain setup ("Advanced..." in the TAP# field)
- Added Cortex-A8 processor selection
- Added BOX pinout button (which is placed on Resurrection page)

Firmware 1.12
------------------
- Addedd Cortex-A8 core 16-bit and 8-bit bus read/writes (which are be used in scripts mostly)
- Addedd CoreSight DAP ROM Table processing for automatic ARM core search.
- Addedd advanced MultiChain selection (IRPRE, IRPOST, DRPRE, DRPOST) in
case simple TAP number is impossible to select (like in OMAP850)
- Addedd feature to set custom timeout after NRST is asserted back to high level
(for backward compatibility default timeout for ARM9 is set to 10ms, for other cores - 0ms)

New Resurrectors:

- HTC Herald Resurrector DLL
- Samsung i8510 Modem Resurrector DLL
- Samsung S5560 Resurrector DLL
- Toshiba G810 Resurrector DLL

Please start the JTAG Manager and click "Check for updates" button.
You'll be notified about new updates. Download everything and restart
the software.
Box firmware will be updated automatically, but in case box stucks in
bootcore mode, update firmware manually. Make sure to select v1.12
firmware.

Enjoy making $$$$ with RIFF Box

16.08.2010 RIFF JTAG – Samsung i7500 unbrick, dead boot repair

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i7500.dll” contains pinout, repair instructions and required repair files for Samsung Galaxy i7500 unbrick, dead boot repair.

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF100.dll” contains pinout, repair instructions and required repair files for ZTE MF100 Modem unbrick, dead boot repair.




http://www.jtagbox.com/jtag-news/riff-jtag-zte-mf100-modem-unbrickrepair/

24.08.2010 ZTE MF112 modem unbrick/repair supported.

Please start JTAG Manager and click “Check for Updates” button. You’ll
be notified about new DLL-s, download it and restart the software.

“ZTE_MF112.dll” contains pinout, repair instructions and required repair files for ZTE MF112 Modem unbrick, dead boot repair.

31.08.2010 Samsung WAVE S8500 Unbrick/Repair boot beta support
This is beta test, and it is not available trough “Check for updates” button.


What You need to repair it ?
- RIFF Box
- Micro USB Cable
- Full charged battery (4.2v)
- CMM + ELF
- Samsung_S8500_PDA.dll
- Pinout
- Multiloader
- USB Drivers
- Firmware files
Procedure:
- Solder RIFF JTAG cable (use very thin wires for PCB, because of battery)
- Insert battery
- Connect Micro USB cable to phone and PC port
- Start the JTAG Manager and select Samsung S8500 PDA from the list
- Switch to “DCC Read/Write” TAB
- Set everything as on photo bellow:
This image has been resized. Click this bar to view the full image. The original image is sized 830x460.
- Press “Read memory” and wait to be finished
- Now switch to “JTAG Read/Write” TAB and press “Connect&Get ID” then “Halt the Target” buttons
- Click “Execute Script” and select CMM file
- Press “Run Script” button
This image has been resized. Click this bar to view the full image. The original image is sized 761x711.
- Ram loader will be uploaded and after its uploaded, phone will automaticaly enter download mode, and detected by PC
- IMPORTANT ! ! ! Now You must disconnect JTAG Cable from RIFF Box
- Start Multiloader 5.62, set “Boot change” and select Boot files folder
- Press download – and wait for process to be finished
- Now phone contains valid bootloader, and can be flashed, so You can desolder JTAG wires from PCB
To enter download mode hold LOCK+Volume Down + Power on Keys.
Problems which You may have:

- Target not detected – check all wires and tp, check battery, 4.2v is a MUST !
- Wrong DCC answer – low battery, or TCK too high, You can use 100KHz TCK too !
- “It not work” – no idea about this lol

02.09.2010 Samsung I5700 Galaxy Lite Unbrick/Repair dead boot supported

Please start JTAG Manager and click “Check for Updates” button. You’ll
be notified about new DLL, download it and restart the software.

“Samsung_i5700_PDA.dll” contains pinout, repair instructions and
required files for single click Samsung I5700 Galaxy Lite Unbrick/Repair
dead boot.





RIFF JTAG – Samsung WAVE S8500 Single Click Unbrick/repair boot





02.09.2010 Samsung WAVE Single Click Unbrick/Repair dead boot released


Please start JTAG Manager and click “Check for Updates” button. You’ll
be notified about new DLL, download it and restart the software.

“Samsung_S8500.dll” contains pinout, repair instructions and required
files for single click Samsung WAVE S8500 Unbrick/Repair dead boot.













RIFF JTAG – HTC HD2 LEO Direct Unlock added





02.09.2010 HTC HD2 LEO Direct Unlock supported

Please start JTAG Manager and click “Check for Updates” button. You’ll
be notified about new DLL, download it and restart the software.

“HTC_HD2.dll” contains pinout, repair instructions and required repair
files for direct HTC HD2 LEO unlock, unbrick and IMEI repair.









RIFF JTAG – Samsung GT-S5230 Hello Kitty Unbrick/Repair dead boot





02.09.2010 Samsung GT-S5230 Hello Kitty Unbrick/Repair dead boot released

Please start JTAG Manager and click “Check for Updates” button. You’ll
be notified about new DLL, download it and restart the software.

“Samsung_S5230.dll” contains pinout, repair instructions and required
repair files for all versions of GT-S5230 Samsung (M, W, T, Hello Kitty)













RIFF JTAG – JTAG Manager v1.14 released



02.09.2010 JTAG Manager v1.14 released

Whats new:

JTAG Manger 1.14

———————

- Increased internal buffers size to support NAND devices with 4KB/256KB
Page/Block size which makes possible now to run Samsung S8500 fully
functional resurrector;

- Added OneNAND 2K/4K pages size selection for DCC Loader setup in
Custom Target Settings mode; (make sure you use latest OneNAND
standalone DCC loaders; old OneNAND loaders may not start on the 1.14
JTAG Manager version);

- Fixed: now OneNAND settings (in DCC Loader Settings) are not discarded to defaults on next software startup.

- Improved presets loading sequence; – (SDK): exported new
SUB_ID_SET_JTAG_SPEED function for resurrectors; Please click “Check for
updates” button to download new version.

RIFF JTAG - How to Unlock HTC Phones

Hi,
Here's very short and simple manual how You can unlock Your HTC phone with RIFF Box.

- Select desired model and read the "Resurrection Help"
- Solder JTAG wires, or connect using JIG
- Press "Resurrection" button
- Check "Reflash Total HTC partition" and enter desired IMEI in IMEI field
- Click "Continue"

This image has been resized. Click this bar to view the full image. The original image is sized 829x458.

If You want to read full flash backup before playing with phone, do this:

- Switch to "DCC Read/Write" TAB
- Select "Access ROM1 Address Space"
- Check "Auto Fullflash size"
- Click "Read Memory"
- When reading is finished, click "Save"

This image has been resized. Click this bar to view the full image. The original image is sized 831x459.


If You want to restore backup, do this :

- Switch to "DCC Read/Write" TAB
- Select "Access ROM1 Address Space"
- Check "Auto Fullflash size"
- In "main" field open desired backup file
- Check "Image Files use Used"
- Check "Flash files - are full Images"
- Click "Write Flash"

This image has been resized. Click this bar to view the full image. The original image is sized 831x460.

Thats mostly it

11.09.2010 Samsung i8320 modem part Unbrick/repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i8320_mdm.dll” contains required repair files for i8320 modem part.




11.09.2010 Samsung m8910 Unbrick/repair boot supported


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_m8910.dll” contains required files for unbrick/repair bricked Samsung m8910.

RIFF JTAG - Samsung S3370, Samsung C5510 updates

15.09.2010 Samsung S3370 Unbrick/Repair bricked phones supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S3370.dll” contains pinout, repair instructions and required files for single click Samsung S3370 Unbrick/Repair boot.



15.09.2010 Samsung C5510 Unbrick/Repair DLL Update
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_C5510.dll” contains required files for unbrick/repair bricked Samsung C5510

Samsung Galaxy S – i9000 unbricking supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Samsung_i9000.dll” contains pinout, repair instructions and required files for single click Samsung Galaxy S – i9000 Unbrick/Repair bricked boot.

Whats new:

• Added optional selection for SPL versions
  
• Added direct Unlock function without SPL reflashing
  

As already noted before, the HTC Desire is being shipped now with SLCD display type, instead of previous AMOLED.
Now You can chose SPL version to be used, 0.80.0000, or 0.92.0007. Latest SPL supports both display types, but at the moment this SPL isn't rooted as we know.

Here is how it works now:



If You want just to repair the SPL, Untick the IMEI and HTC Partition check boxes.
If phone IMEI or eeprom is damaged, You need to tick the HTC Partition and IMEI check boxes, and of course fill out the desired IMEI.

If You just want to unlock phone, without any other changes, select "Unlock Settings" TAB and press "Unlock" button:



This function will unlock the phone without touching any other memory part.

HTC Nexus One Unlock/Unbrick/IMEI Repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“HTC_Nexus.dll” contains pinout, repair instructions and required files for single click HTC Nexus One Unlock, Unbrick, IMEI repair.


__________________

Huawei E220 Broadband modem unbrick/repair dead boot


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Huawei_E220.dll” contains pinout, repair instructions and required files for single click Huawei E220 broadband modem unbrick/repair dead boot and firmware damages.


__________________

05.10.2010 JTAG Manager v1.15, RIFF Box firmware v1.14 released

Whats new:

Firmware 1.14
---------------------
- code is optimized to avoid deadlocks in Cortex-A8 handling routines (deadlocks appear due to communication errors);
- Cortex-A8 debug is now available in ARM/Thumb modes (use the GDBServer for this);
- ARM946E core support is added (which is mostly a debug access to the CP15 coprocessor);
- added new RESET type for ARM9xxx cores: HW_RESET - targets which have dedicated TRST can be halted
at the very first instruction core executes after the system reset signal (NRST) was applied.
Importance of this: if some harmfull/"unlucky" code is written to a boot zone of a device, which (code)
on the device startup results in h/w blocking, jtag disabling, core resetting, etc., then connecting via JTAG to such target
becomes an impossible task, since JTAG host has not enough time to halt the target before it becomes unusable by a harmfull code.
Using HW_RESET type ensures the target's core does not execute even a single instruction after the reset signal (NRST) was applied.
- removed bug which could cause deadlocks of box during a h/w script execution.
____________
JTAG Manager 1.15
---------------------
- added extended flash chip info handling for example for NOR memories support by DCC Loaders;
- added Resume feature for interrupted writes (which could be performed by WriteMemory button (DCC Page) or by Resurrector DLL):
if target loses power, connection is broken or any other malfuntion happens during write operation, software will store current
write context; you can reconnect target and start write/resurrection again - software will prompt you whether to start again or to continue write from the
interrupted point. This feature is applicable to all write conditions (writes by resurrectors, or manual writes through the DCC Read/Write page features).
- added 3 buttons on Box Service page for quick access to the RIFF's manual PDFs;
- fixed a not harmfull bug inside of the core reset (when NRST is applied) command sequence;
- added feature: if write error appears and 'Ignore' is choosen, user can order software to apply 'Ignore' for further write errors automatically;
- added standalone setup dialog for automatic write errors handling;
- added BAD Blocks Handling feature using the following algo:
If there are data chunks A B C & D to be written into blocks 1 2 3 & 4 respectively, and for example block 3 is found to be BAD, then software will write:
data A -> into block 1
data B -> into block 2
--------> block 3 is bypassed (and marked as bad)
data C -> into block 4
data D -> into block 5
It's clear that block 5 was not intended to accept the data D. Thus:
- if block 5 had some other info then this info will be lost and will be overwritten with the data D.
- if block 5 was free for use, then nothing bad happens.

So, main conclusions:
---------------------
1. BAD Blocks Handling is IMPOSSIBLE (POINTLESS) for writting FULL images (user can chose only 'Ignore' option)
2. When writting data chunks of length less than full flash size user is prompted to select 2 options:
a) Overlap (in example above this would mean to write data D into block 5)
b) Cut Excess (in example above this would mean to not touch original 5th block's contents and just discard data D to be written)

************************************************** ************************************************** *********************************
NOTE: Bad block handling is allowed by default only through the DCC Read/Write page write.
----- Old Resurrector DLLs were not adapted for this feature, thus Bad Block handling will be implemented only in new DLLs.
If you meet a Bad Block Error during resurrection contact support in order to update DLL to a Bad Blocks adapted version.
************************************************** ************************************************** *********************************

- solved problem which caused update module to display files for download which were already up-to-date for cases
when JTAG Manager was installed on FAT (FAT/FAT32) file systems.
- very dangerous bug fixed: "Irnored" word misspelling is corrected to the valid "Ignored" one

05.10.2010 HTC Desire and HTC Magic32 (A and B versions) DLL updates

Whats new:

- Bad blocks handling in HTC Desire DLL
- ROM2 mapping in HTC Desire and HTC Magic
- Android style support in ECC handling (0x204 byte per page)

Please start the JTAG Manager, and click "Check for Updates" button to download new DLL-s.

05.10.2010 HTC Desire and HTC Magic32 (A and B versions) DLL updates

Whats new:

- Bad blocks handling in HTC Desire DLL
- ROM2 mapping in HTC Desire and HTC Magic
- Android style support in ECC handling (0x204 byte per page)

Please start the JTAG Manager, and click "Check for Updates" button to download new DLL-s.

06.10.2010 Huawei broadband modem E170/E172 unbrick supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Huawei_E17x.dll” contains pinout, repair instructions and required files for single click Huawei E170/E172 broadband modem unbrick/repair dead boot and firmware damages.

Huawei Broadband modem E169 Unbrick/Repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E169.dll” contains pinout, repair instructions and required files for single click Huawei E169 broadband modem unbrick/repair dead boot and firmware damages.
__________________